-30%
, ,

WiFi EnhancedXN-G806w 4G Industrial Router


USR-G806w is an industrial 4G cellular router from PUSR. It also comes with 3 Ethernet ports and enhanced Wi-Fi, which can provide users with rich networking methods. This device has undergone rigorous EMC testing, which allows the product to work in very harsh industrial environments such as Bus & Truck, intelligent Reboot and so on.

6,175.00 8,821.00

Compare

USR-G806w is an industrial 4G cellular router from PUSR. It also comes with 3 Ethernet ports and enhanced Wi-Fi, which can provide users with rich networking methods. This device has undergone rigorous EMC testing, which allows the product to work in very harsh industrial environments such as Bus & Truck, intelligent Reboot and so on.

USR-G806w hardware specification
Cellular Interface Frequency -E -AU
TDD-LTE:B38/40/41

FDD-LTE:B1/3/7/8/20/28A

WCDMA:B1/8

GSM/EDGE:B3/8

TDD-LTE:B40

FDD-LTE:B1/2/3/5/7/8/28

WCDMA:B1/2/4/5/8

GSM/EDGE:B2/3/5/8

Antenna 1 x SMA-K
SIM card 1 x (3 V & 1.8 V) Standard 4FF SIM
Ethernet WAN 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, supports auto MDI/MDIX,1.5KV network isolation transformer protection
LAN 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX,1.5KV network isolation transformer protection
Indicators PWR red,always on after powered on
WIFI green,always solid on when WiFi is enabled and working properly
2/3/4G mode indicator 2G led is on after connected to 2G network

3G led is on after connected to 3G network

Both leds is on after connected to 4G network

SIG Signal strength:2 LED issolidon,strongest signal
Wi-Fi Standards & Frequency IEEE 802.11b/g/n,  2.4GHz,  AP/STA/Repeater mode
Data speed 300Mbps
Antenna 2 x RP-SMA-K
MIMO 2×2
Transmission distance 500 meters by line of sight.Actual transmission distance depends on environment of the site.
WiFi users Up to 20 simultaneous connections
Power Supply Adaptor DC 12V/1A
Connector DC Power Jack Barrel Type Female 5.5*2.1mm Round socket or 2 PIN industrial terminal block,reverse polarity protection
Input voltage DC 9-36V
Power consumption Average 260mA/12V
Physical Characteristics Casing material Metal shell,IP30
Dimensions 104.0*102.0*28.0 (L*W*H, antenna pedestal,terminal block and DIN Rail are not included)
Installation Panel mounting, DIN-Rail mounting
EMC Static IEC61000-4-2, level 3

Pulsed Electric Field IEC61000-4-4, level 3

Surge IEC61000-4-5, level 3

Operating temperature -20℃~+70℃
Storage temperature -40℃~+125℃(non-condensing)
Operating humidity 5%~95%(non-condensing)
Others Reload Pinhole reset button
TBD Debug interface (TTL Level)
Ground protection Screw
USR-G806w Software Specifications
Network Connection WAN protocol PPP, PPPoE, DHCP client
LAN protocol ARP, DHCP server, NAT,VLAN
4G network access Auto APN/VPDN, private network

Access authentication: CHAP/PAP

WLAN security Open system,WPA/WPA2 PSK

TKIP/AES encryption

IP routing Static routing
Network diagnosis Ping,route trace,DNS
Device management Configuration Web
Remote management SSH, AT command,SNMP,SMS
PUSR platform Remote monitoring,remote upgrade,alarming,base station location,remote access to web pages of the router
Security Failover backup WiFi WAN, Mobile, Wired options, each of which can be used as an automatic Failover
Firewall DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control
VPN Supports PPTP, L2TP, GRE, IPSEC VPN (IKEv1), OPENVPN protocols
 

Service

DDNS Remote access the device through domain name
Alarm Email,SMS
 Others NTP client

Timing task

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “WiFi EnhancedXN-G806w 4G Industrial Router”

There are no reviews yet.

Select your currency
INR Indian rupee

Select at least 2 products
to compare